WiFi Specialists

Your ISP & Router Replacement Is Not A WiFi Solution

When the WiFi isn’t running well, often company owners contact their Internet Service Provider. The ISP recommends that the router be replaced. This accomplishes little as depending on the structure of your property , wifi signals can only be propagated well for 100 to 200 feet by routers. The issue isn’t with the router.

Most of the time, the issue is with the signal outside the router, as well as network traffic. If you get an internet signal at your place of operation, your ISP has met its duty to you. WiFi networking is the responsibility of your IT networking business, not your ISP. You’ll need adequate networking, commercial WiFi facilities, additional cable runs, and QoS programming.

If internet and WiFi are vital to your enterprise, you should consider setting up a failover link with a secondary ISP to provide at least basic WiFi if your primary provider goes down. Often a good ISP will provide 4G/5G failover SIMs which are integrated into your ISPs router.

Internet Is Too Slow For WiFi

If you have the choice, go for fibre internet. If that isn’t an alternative, go with the fastest internet kit your ISP has to sell. The size of your internet conduit influences the amount of traffic that can pass through it at any given time. A quick internet connection is expected for several people to operate on WiFi or the web at the same time.

Too Much WiFi Traffic

The most popular WiFi problem is when you want to do too much on your network. You’ll need Quality Of Service programming to coordinate traffic on your network for optimal efficiency.

Building Interfering WiFi Signal

Your WiFi signal may be blocked or disrupted by concrete barriers, steel frames, and electrical interference. This is quickly achieved by using hardware preparation to determine where components can be put to maximise the experience.

Residential Equipment In The Office

Residential WiFi infrastructure was not designed to handle industrial WiFi loads. It can’t be set up to route and prioritise voice or data traffic on your network, either. Keep your personal belongings at home. In the office, use efficient, commercial-grade WiFi hardware.

Wrong WiFi Configuration

NAT loops, printer and computer compatibility concerns, and spotty WiFi signals may all be caused by a poor initial configuration or insufficient hardware. Much of this can be tackled in advance with a well-thought-out strategy.

No WiFi Security

WiFi is unstable by itself. Those WiFi thieves will slow you down or hack your data if you don’t have guest WiFi or if it isn’t set up with a partition. These issues can be alleviated with improved security protocols.